Autronica Autroprime User's Guide download pdf (Page 64)

Show Unit Properties

Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,

Autronica Fire and Security AS

Page 62

14.13 Activation Groups

Points and general outputs can be assigned to Activation Groups

(configurable). An Activation Group can be configured to trigger an

output in the event of an alarm. An output unit connected to this output

will then initiate a signal to activate external equipment, as for

example, doors, sprinkler systems, ventilation valves, horns and fire

lights.

Using the Enter button

after selecting an activation group reveals

the following properties:

 The name of the local output

 Activate group on Unit State:

meaning which alarm level the points within this activation group

will react to (pre-alarm or alarm).

 Activation Group Dependency:

meaning how many points within this activation group that must be

in alarm state before actions are initiated (1-5 and All).

Using the Function button

after selecting an activation group

gives the following menu selections:

 Show Member Points

 Show Connected Units

14.14 External Interfaces

External Interfaces include the following:

 Serial Port Settings

 TCP/IP Port Settings (Ethernet)

 ESPA

 MODBUS

 VDR (Voyage Data Recorder)

14.14.1 Serial Port Settings

Using the Enter button after selecting serial port settings reveals

the following properties:

 bits per second

 word length

 parity

 stop bits

 hardware interface (RS-232, etc.)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 81 82

No comments

Autronica Autroprime User's Guide Page 64