Autronica Autroprime User's Guide download pdf (Page 49)

Disabling

Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,

Autronica Fire and Security AS

Page 47

12.3 Disabling Activated / Deactivated Components

When you disable an active component, for example, a sounder

issuing an alarm signal, the component will immediately switch to the

OFF state without any user notification and/or confirmation cause.

A disablement of a deactivated component, for example, a sounder

not issuing an alarm signal, will have no immediate effect on system

operation.

Both activated and deactivated disabled components will remain

switched off until enabled.

12.4 Disabling Detection Zones

When you disable a Detection Zone - all points within the specified

detection zone will be disabled. A detection zone will not be indicated

as disabled unless all points within the zone have been disabled.

A disable time span can be set. When the disable time span expires,

the detection zone will automatically be enabled. The detection zone

can also be enabled manually from the Enable Menu.

12.5 Disabling Alarm Zones

When you disable an Alarm Zone all Fire Alarm Devices (FADs;

sounders, bells etc.) within the specified alarm zone will be disabled.

An alarm zone will not be indicated as disabled unless all Fire Alarm

Devices (FADs) within the alarm zone have been disabled.

A disable time span can be set. When the disable time span expires,

the alarm zone will automatically be enabled. The alarm zone can also

be enabled manually from the Enable Menu (or disablement window).

12.6 Disabling Points

When you disable a Point (fire detectors / manual call points), no

alarm signal or fault signal from this point will be sent in the event of

an alarm / fault.

A disable time span can be set. When the disable time span expires,

the point(s) will automatically be enabled. The point(s) can also be

enabled manually from the Enable Menu (or disablement window).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 81 82

No comments

Autronica Autroprime User's Guide Page 49