Autronica Autroprime User's Guide download pdf (Page 56)

Enabling

Operator's Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-OPERATE/FGB Rev. B, 2009-10-28,

Autronica Fire and Security AS

Page 54

13.12 How to Execute Commands from the

Enable Menu

The example below shows how to enable a Detection Zone. The

similar procedure applies to all other selections (except Enable Day

Night Mode, see next chapter). Note that points can also be enabled

from the Disablement window.

 To enter the Menu Mode from operation mode or the panel’s idle

state, press and hold down the Enter button

for a few seconds.

 Use the arrow down button to scroll down and select Enable.

 Press the Enter button

 Only disabled detection zones are shown (if any are disabled).

 Use the arrow button to scroll down and select, for example,

“Detection Zone1”.

 To mark the selected detection zone, press the Select button

 Press the Function button

 Press Enable (you can also change the disable time span).

 To accept, press the Enter button

twice.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

No comments

Autronica Autroprime User's Guide Page 56