Autronica Autroprime Specifications download pdf (Page 24)

Cable Connections

Installation Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME-INSTALL/DGB Rev. E, 2011-08-16,

Autronica Fire and Security AS

Page 24

if on-wall cabling is used, remove the appropriate knockouts on the

top, bottom, left or right hand side of the panel.

Before mounting the panel on the bracket, connect all external cables

to the correct terminal points (the panel bus cable). Refer also to

Description of Terminal Points – Main Board, chapter 9.7

 Verify that all cables are correctly and properly connected before

connecting the mains cable and the internal battery cables.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

No comments

Autronica Autroprime Specifications Page 24