Autronica BS-320 User's Guide download pdf (Page 39)

In the Event of a Fire Alarm

Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. I, 2009-02-27,

Autronica Fire and Security AS

Page 37

Step Actions to be taken Display Indication Audible Indication

The point(s) still in alarm will be

shown on the display.

If no actions are taken, the

points still signalling alarm will

automatically be reactivated after

a predefined timeout.

If you want to disable the

point(s) - for example, a manual

call-point -still signalling alarm,

go to step 11. The points can

also be reactivated (step 12) at

any time after the disablement

(ALARMDISABLE) has taken

place.

To disable all points still

signalling alarm, press

Comments: The red Fire Brig. Signalled indicator goes off.

The yellow Function Disabled indicator is lit.

All point(s) still signalling alarm are disabled. To reactivate the point(s), you

have to press Action Digit 3 (REACTIVATE).

To reactivate the

point(s), press Action

Digit 3.

The point(s) will again

signal alarm.

The internal buzzer on

the operator panel is

turned on.

Comments: The yellow Function Disabled indicator goes off.

The red FIRE indicator starts to blink.

The red Fire Brig. Signalled indicator is lit.

To reset the system,

repeat step 9 and 10.

(Press the red Silence

Alarms button and the

green Reset button).

Comments: If there are no points signalling a fire alarm, the system is reset.

The red FIRE indicator goes off.

The red Fire Brig. Signalled indicator goes off.

The panel enters its idle state.

RESET